SLS2 Pro Adhesive has excellent bond strength on many materials including wood, plasterboard, concrete, insulations, ceramics, metals, fiberglass as well as duro and Thermoplastics (providing suitable surface preparation has taken place).

SLS2 Pro Adhesive can also be overpainted once the adhesive has set. i.e., around 24h to fully set based on a 3mm bead. (Larger beads can take longer to set depending on temperature and atmospheric conditions.)

Usage
Surfaces to be bonded must be thoroughly clean, dry, and free from dirt, dust or any other contaminant liable to impair adhesion. Please slightly roughen up any smooth surfaces to be bonded together with a scouring pad. Use in well ventilated areas. Wear protective clothing and gloves.

Warnings
May cause an allergic skin reaction. If skin irritation occurs, or if you feel unwell, seek medical advice. Please note that this adhesive is harmful to aquatic life.

Specification
Contains 3-(trimethoxysilyl) propylamine, Methyl (1,2,2,6,6-Pentamethy-4-piperidyl) sebacate.